CPW operates four pipes mills (one 7”
ERW/HFI mill, one 26”
ERW/HFI mill, one 100”
SAWH mill and one 56”
LSAW mill). Downstream from the pipe mills CPW operates two external and one internal
Coating mills
The latest investment of LSAW/JCOE pipe mill, supplied by SMS-Meer,intends tocover the increasing needs for offshore and deep offshore pipelines.
Further information of our pipe production units as mentioned here below:
7’’ ERW/HFI unit: The annual production capacity of this unit is 150.000 tons with below technical characteristics:
| Outside diameter: |
2” - 7 5/8” |
| Wall thickness: |
up to 10mm |
| Steel Grades: |
up to S355J2H |
| Lengths: |
up to 14m |
26” ERW/HFI unit: The annual production capacity of this unit is 400.000 tons with below technical characteristics:
| Outside diameter: |
8 5/8” - 26” |
| Wall thickness: |
25.4mm (up to 1") |
| Steel Grades: |
up to X80 |
| Lengths: |
up to 24.4m |
100” SAWH unit: The annual production capacity of this unit is 375.000 tons with below technical characteristics:
| Outside diameter: |
26” - 100” |
| Wall thickness: |
25.4mm (up to 1") |
| Steel Grades: |
up to X80 |
| Lengths: |
18.3 m (up to 24.4 m with Double Jointing) |
56” LSAW unit: The annual production capacity of this unit is 400.000 tons with below technical characteristics:
| Outside diameter: |
16” - 56” |
| Wall thickness: |
up to 40mm |
| Steel Grades: |
up to X100 |
| Lengths: |
18.3 m (up to 24.4 m with Double Jointing) |
Coating & Lining mills
| |
External Coating |
Internal Coating |
| |
1st Line |
2nd Line |
|
| Line |
TCP 40” |
TCP 100” |
TLP 56” |
| Outside diameter |
4 1/2” - 40” |
8 5/8” - 100” |
8 5/8” - 56” |
| Maximum Length |
18.3m |
24.4m |
24.4m |
| Capacity |
6.300.000sq.m |
2.000.000sq.m |